Gaggenau vg425111, 400 series, vario domino hob, gas, 38 cm
- Multi-circuit burner, up to 4 kw
- Fully electronic step regulation in 12 power levels
- Exactly adjustable and reproducible flame sizes
- Automatic fast ignition, electronic flame monitoring with automatic re-ignition
- Simmer stage for simmering at lowest power level
- Multi-circuit burner, up to 4 kw
- Fully electronic step regulation in 12 power levels
- Exactly adjustable and reproducible flame sizes
- Automatic quick ignition, electronic flame monitoring with automatic re-ignition
- Simmer stage for simmering at lowest power level
- Solid stainless steel control knob
- Precisely processed 3 mm thick stainless steel
- optional surface-mounted installation with visible edge or discreetly integrated flush with the surface
- Can be perfectly combined with other Vario appliances of the 400 series
- 1 high burner with 2 flame circuits (165 w - 4000 w), suitable for pots up to max. ø 28 cm.
- 1 normal burner with 2 flame circuits (165 w - 2000 w), suitable for pots up to max. ø 24 cm.
- Control knob with illuminated ring, cooking zone and power markings.
- One-hand operation.
- Fully electronic control for precise regulation of the 12 power levels plus simmer level.
- Automatic quick ignition.
- Simmer stage.
- Cast iron grate with level, continuous pot surface.
- Brass burner rings.
- Electronic flame control with automatic re-ignition.
- Residual heat indicator.
- Safety shut-off.
- Depending on the type of installation (surface-mounted or flush-mounted, with or without appliance cover), pay attention to the specific definition of the cut-out and the toggle positions.
- if the panel thickness exceeds 23 mm, the sketch "Installation of operating toggle" must be observed (rear must be cut out).
- When combining several Vario units of the 400 series, a connecting strip va 420 must be inserted between the units. Depending on the type of installation, provide the appropriate connecting strip.
- The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take into account the weight of the unit including additional load.
- Additional information for flush mounting:
- Installation is suitable in countertops made of stone, synthetic material or solid wood. Heat resistance and waterproof sealing of the cut edges must be taken into account. For other materials, consult the countertop manufacturer regarding use.
- The groove must be continuous and level to ensure uniform support of equipment on the gasket. Do not use spot relining.
- Due to dimensional tolerances of the combinations and the countertop cutout, the joint width may vary.
- When mounting several units in individual cutouts, a web width of 50 mm must be planned between the individual cutouts.
- Special nozzles must be ordered as spare parts.
- Provide for electrical connection (without power supply the unit is not functional).
- Air intake from above.
- No intermediate floor required.
- Back wall and wall end strips must be heat-resistant and made of non-combustible material.
- Observe a lateral distance of at least 150 mm to heat-sensitive furniture parts or surfaces or install heat-insulating insulation.
- When operating next to the trough ventilation vl 414, the air guide rail aa 414 is recommended to ensure the maximum output of the cooktop.
- If the total power of the installed gas cooktops exceeds 11 kw, observe local regulations regarding room ventilation, room size, and combination with range hoods in exhaust or recirculation mode. Above 11 kw total power, the minimum distance to an extractor hood is 70 cm.
- Device can be snapped into the worktop from above.
- Device weight: approx. 13 kg.
- Total connected load gas 6.0 kw.
- Total connected load electric 15 w.
- Connection cable 1.4 m with plug.
| Colour: | Stainless steel |
| Product type: | Module hob |
| device width: | 40 cm |
| controls: | Integrated into furniture front Cylinder toggle |
| Shipping weight: | 15,00 kg |
| Item weight: | 13,00 kg |
| Dimensions ( Length × Width ): | 52,00 × 38,00 cm |
- Product series400 series
- Type of construction: Built-in
- Control systemelectronic
- Operating elements: integrated in furniture front, cylinder knob
- Energy sourcegas
- Position of the control: Outside the unit
- Gas type: Liquid gas 50 mbar (DE,AT,CH)
- Main surface material: Stainless steel, brushed
- Device color: stainless steel
- Frame design: Professional, standard frame
- Frame color: stainless steel, stainless steel
- Gas connection value: 6000 w
- Connected load: 15 w
- Voltage: 220-240 V
- Frequency: 50; 60 TPU00040
- Approval certificates: ce, VDE
- Length connection cable: 140 cm
- Plug type: Schuko/Gardy.w.grounding
- Device height: 15,8 cm
- Device width38 cm
- Device depth52 cm
- Packed unit height30 cm
- Width packed unit50 cm
- Depth packed product60 cm
- Minimum niche height13,4 cm
- Maximum niche height13,4 cm
- Minimum niche width35,9 cm
- Niche width maximum36,1 cm
- Niche depth49,1 cm
- Net weight: 13,4 kg
- Gross weight: 15,4 kg
- Energy intelligent device, can optimize consumption behavior (2017/1369/EU): No
- Wireless communication possible: No
- Network broadband technology: Not applicable
- SIM card slot availableno
- Remote upgrade capability: No
- Cooking zone dimensions28 cm
- Dimensions of the 2nd cooking zone24 cm
- Cooking zone power: 0.165-4 w
- Power of the 2nd cooking zone: 0.165-2 w
- Position of the 2nd cooking zone: center back
- Type of 2nd cooking zone: gas, normal burner
- Operation control lightyes
- Control: Stepless energy control
- Cover type: Without
- Type of pot support: Cast iron pot support
- Type of gas safety devicecentral electronic safety device
- Ignitionyes
- Residual heat indicator: Separate
- Main switchno
- Electronic clock: No
- Possibility to combine cooking zones/areas: No
Average item rating
Downloads
Produktsteckbrief
Benutzeranleitung (installation instruction)
Benutzeranleitung (installation instruction)
Benutzeranleitung (instruction for use)
