Nothing found?
You could not find your desired device yet or you need a device of the manufacturers shown above? Then please tell us the desired item numbers and we will send you a non-binding offer.
Gaggenau VG425115, Series 400, Vario gas hob, 38 cm, liquid gas 50 mbar
- Multi-circuit burner, up to 4 kW
- Fully electronic level control in 12 power levels
- Solid stainless steel knob, also available with a black, robust surface, for precise control and personalization
- li>
- Precisely processed 3 mm thick stainless steel
- Choice of surface-mounted installation with a visible edge or discreetly integrated flush with the surface
- Multi-circuit burner, up to 4 kW
- Fully electronic level control in 12 power levels
- Solid stainless steel knob, also available with a black, robust surface, for precise control and personalization
- Precisely processed 3 mm thick stainless steel
- Choice of surface-mounted installation with a visible edge or discreetly integrated flush with the surface
- Exactly adjustable and reproducible flame sizes
- Automatic rapid ignition, electronic flame monitoring with automatic re-ignition
- Simmer setting for simmering at the lowest power level
- Smooth cast iron grates
- Can be perfectly combined with other Vario devices from the 400 series
- 1 powerful burner with 2 flame circles (165 W - 4000 W), suitable for Pots up to a maximum diameter of 28 cm.
- 1 normal burner with 2 flame circles (165 W - 2000 W), suitable for Pots up to a maximum diameter of 24 cm.
- Control knob with illuminated ring, cooking zone and power marking.
- One-handed operation.
- Fully electronic control for precise regulation of the 12 power levels plus simmer level.
- Automatic quick ignition.
- Simmering level.
- Cast grate with flat, continuous pot surface.
- Burner rings made of brass.
- < li>Electronic flame monitoring with automatic re-ignition.
- Residual heat display.
- Safety shutdown.
- Depending on Installation type (top-mounted or flush, with or without device Cover) pay attention to the specific definition of the cutout and the toggle positions.
- If the panel thickness exceeds 23 mm, the sketch "Mounting the control toggle" must be observed (the back must be left out ).
- When combining several Vario devices from the 400 series, a VA 420 connecting strip must be used between the devices. Depending on the type of installation, provide appropriate connecting strips.
- The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take the weight of the device including additional load into account.
- Additional information for flush installation:
- The installation is suitable for worktops made of stone, synthetic material or solid wood. Heat resistance and waterproof sealing of the cut edges must be taken into account. For other materials, please consult the worktop manufacturer regarding use.
- The groove must be continuous and even to ensure that the devices rest evenly on the seal. Do not use selective lining.
- The joint width can vary due to dimensional tolerances of the combinations and the worktop cutout.
- When installing several devices in individual cutouts, a web width of 50 mm must be planned between the individual cutouts.
- Special nozzles must be ordered as spare parts.
- Provide an electrical connection (the device cannot function without a power supply).
- Air intake from above. < li>No intermediate floor required.
- The back wall and wall trim strips must be heat-resistant and made of non-combustible material.
- Maintain a lateral distance to heat-sensitive furniture parts or surfaces of at least 150 mm or install heat-insulating insulation .
- When operating alongside the VL 414 downdraft ventilation, the AA 414 air guide rail is recommended to ensure the maximum performance of the Hob.
- If the total output of the installed Gas hobs is over 11 kW, the local regulations apply with regard to room ventilation, room size and combination with Extractor hoods in exhaust or recirculation mode.
- The minimum distance from the Hob surface to a piece of furniture made of combustible material mounted above it is 70 cm.
- The minimum distance to A built-over extractor hood must be taken into account when planning the individual extractor hood.
- The device can be snapped into the worktop from above.
- Appliance weight: approx. 13 kg.
- Total connection value gas 6.0 kW.
- Total connection value electric 15 W.
- Connection cable 1.4 m with plug. < /ul>
Product type: | Hob module |
Color: | stainless steel |
Device width: | 40cm |
Shipping weight: | 15,00 kg |
Item weight: | 13,00 kg |
Dimensions ( Length × Width ): | 52,00 × 38,00 cm |
- Product series: Series 400
- Design: Built-in
- Control: Electronic
- Energy source: Gas
- Location of the control: Outside the device li>
- Gas type: Liquefied gas 50 mbar (DE,AT,CH)
- Main surface material: Brushed stainless steel
- Color of the device: Stainless steel
- Basic color of the product: Not applicable
- Frame design: Professional, standard frame
- Frame color: Stainless steel, stainless steel
- Gas connection value: 6000 W
- Connection value b>: 15 W
- Voltage: 220-240 V
- Minimum voltage: 220 V
- Maximum voltage: 240 V
- Frequency: 50; 60 TPU00040
- Minimum frequency: 50
- Maximum frequency: 60
- Length of connection cable b>: 140.0 cm
- Plug type: Schuko/Gardy.with earthing
- Device width: 38 cm
- Device depth: 52 cm
- Height of packaged device: 30 cm
- Width of packaged device b>: 50 cm
- Depth of packaged product: 60 cm
- Minimum niche height: 13.4 cm
- Niche height maximum: 13.4 cm
- Niche width minimum: 35.9 cm
- Niche width maximum : 36.1 cm
- Niche depth: 49.1 cm
- Net weight: 13.2 kg< /li>
- Gross weight: 15.2 kg
- Energy-intelligent device, can optimize consumption behavior (2017/1369/EU): No li>
- Wireless communication possible: No
- Network broadband technology: Not applicable
- SIM card slot available: No
- Type of interface for control: No
- Possibility of remote upgrade: No< /li>
- Dimensions of the cooking zone: 28 cm
- Dimensions of the 2nd cooking zone: 24 cm
- Power of the cooking zone: 0.165-4 W
- Power of the 2nd cooking zone: 0.165-2 W
- Location of the 2nd . Cooking zone: middle at the back
- Type of the 2nd cooking zone: gas, normal burner
- Operation indicator light: Yes< /li>
- Control: Stepless energy control
- Cover type: Without
- Type of pot support: Cast pot support
- Type of gas safety device: Central electronic safety device
- Ignition: Yes
- Residual heat indicator: Separate
- Main switch: No
- Safety devices: automatic re-ignition, electronic. Flame monitoring, safety valve
- Electronic clock: No
- Possibility of combining cooking zones/areas: No
- Prevent boiling over with cooking sensor: No
- Flexible induction technology supported : No
- Hob with booster function: No
- Temperature control for perfect frying results: No
- Cord included: Yes li>
- Wok burner supported: No
- COMBINED_NOMENCLATURE_CODE: 73211190
There are no reviews yet.