Bora PURA Pure induction hob with integrated hob extractor

Description

BORA Pure induction hob with integrated hob extractor - PURA exhaust air

Functions

Intuitive sControl operation
The unique vertical slider makes operation even easier by intuitively moving your finger up/down or directly tapping. All important operating functions are always quickly accessible via one touch.

Compact size
Thanks to its compact dimensions and a hob depth of 515 mm, the system is suitable for the standard kitchen units (60 cm from the front edge) of all common manufacturers.

Easy cleaning
The parts exposed to the cooking fumes can be easily removed through the easily accessible, wide inlet opening. They are cleaned in the dishwasher - requiring very little space.

Lowest volume
Always extremely quiet - even at high performance levels: The reason is the optimal air flow and the use of an extremely low-noise fan. There are no distractions while cooking and conversations remain undisturbed.

Integrated fat collection tray
If something goes wrong while cooking, the integrated tub safely catches solids and liquids.

Maximum storage space
The low height of under 200mm guarantees maximum storage space for pots and other kitchen utensils in the base cabinet. Even in the kitchen unit with a depth of 60 cm, no drawers are shortened in recirculation mode. Completely different than usual.

Minimalist design
The hob and extractor are completely flush. The perfect lines allow for an inconspicuous and highly elegant integration into any modern kitchen architecture. The operation in standby is almost invisible and during operation it is reduced to the essentials thanks to intelligent lighting.

Automatic trigger control
The performance of the extractor regulates itself independently according to the current cooking process. There is no need for continuous manual intervention. Full concentration remains on cooking.

Spacious overflow tray - collection volume 3 liters
The large overflow pan on the bottom of the device can hold up to 3 liters of liquids without damaging the device. The overflow tray can be easily removed from below without any specialist knowledge.

Super Simple Mode
All operating functions - except for cooking zone and power level selection - are deactivated. The result is a significantly reduced look. In addition, no additional functions are accidentally activated that the customer does not even use.

Technical data

Multi-phase connection voltage	380 - 415V 2N / 3N
Single-phase connection voltage	220 - 240 V
Frequency	50/60 Hz
Maximum power consumption	7.6 kW (4.4 kW / 3.6 kW)
Fuse protection / three-phase mains connection	3 x 16 A (standard connection)
Fusing / two-phase mains connection	2 x 16 A
Fusing / single-phase mains connection	1 x 32 A (1 x 20 A / 1 x 16 A)
Dimensions (width x depth x height)	760 x 515 x 199 mm
Weight (including accessories/packaging)	22.5 kg
Material surface	Glass ceramic
Hottop extractor power levels	1 - 9, P
Power levels for the hob	1 - 9, P
Channel connection	BORA Ecotube
Large cooking zone at the front	Ø 210mm
Large cooking zone at the back	Ø 175mm
Power cooking zone at the front	2300W
Power cooking zone at the back	1400W
Performance power level cooking zone at the front	3000W
Performance power level rear cooking zone	2100W

Product description

intuitive sControl operation
lowest volume
easy cleaning
Integrated fat collection tray
maximum storage space
compact size
automatic trigger control
Spacious overflow tray
Demo mode

Scope of delivery

Induction hob with integrated hob extractor - PURA exhaust air
Inlet nozzle black
Stainless steel grease filter
Operating and assembly instructions
Mounting clamps
Sealing tape
Height adjustment plate set
Housing cover power connection
Mounting accessories for mains connection

Accessories optional

Inlet nozzle black PUED
Inlet nozzle greige PUEDG
Inlet nozzle red PUEDR
Inlet nozzle jade green PUEDJ
Inlet nozzle orange PUEDO
Inlet nozzle blue PUEDB
Stainless steel grease filter PUEF
Sealing tape UDB25
Hob frame BKR760
Home In Module PUHIM
Air purification box PULB
Air purification box telescopic pull-out PULBTA

Product and planning information

Connection cable must be provided on site
Mains connection socket at the front
The BORA Ecotube duct system is optimally tailored to the BORA hob extractors and ensures 100% functionality and best performance
An interface for external devices (e.g. window contact switch UFKS) is possible with the optional accessory PUHIM Pure Home In module.
Ensure there is sufficient ventilation underneath the hob
Mounting type: flush or top-mounted
The drawers or shelves in the base cabinet must be removable for maintenance and cleaning purposes
Please note that induction-capable cookware must be used with induction hobs
The Pure hob extractor system can be combined with all BORA sockets
No compatibility with BORA universal fans